Modem Speed; Fax Reports - Fuji Xerox DocuPrint CM405 df User Manual

ECM
Purpose:
To set whether to enable or disable the Error Correction Mode (ECM). To use the ECM, the remote machines must
also support the ECM.
Values:
Off
*
On

Modem Speed

Purpose:
To adjust the fax modem speed when a fax transmission or reception error occurs.
Values:
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
*
33.6 Kbps
Display Manual Fax Recipients
Purpose:
To set whether to display the fax number of the recipient on the sending fax screen when manually sending a fax.
Values:
Off
*
On

• Fax Reports

Purpose:
To configure settings for fax reports.
Fax Activity
Purpose:
To set whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications.
Values:
*
Auto Print
No Auto Print
Fax Transmit
Purpose:
To set whether to print a transmission result after a fax transmission.
Values:
Print Always
*
Print On Error
Print Disable
Disables the ECM.
Enables the ECM.
Does not display the fax number when manually sending a fax.
Displays the fax number when manually sending a fax.
Automatically prints a fax activity report after every 50 incoming and outgoing fax
communications.
Does not automatically print a fax activity report after every 50 incoming and
outgoing fax communications.
Prints a transmission report after every fax transmission.
Prints a transmission report only when an error occurs.
Does not print a transmission report after a fax transmission.
Using the Operator Panel Menus and Keypad
313