Installing A Retard Roller In The Standard 550 Sheet Tray - Fuji Xerox DocuPrint CM405 df User Manual

Installing a Retard Roller in the Standard 550 Sheet Tray

1
Slide the two axles of the retard roller into the holes on the standard 550 sheet tray.
2
Press down the retard roller until it snaps.
3
Load paper in the standard 550 sheet tray, and then insert the tray into the printer and push until it stops.
IMPORTANT:
• Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
453
Maintenance