Installing Print Driver On Computers Running Windows; Identifying Print Driver Pre-Install Status (For Network Connection Setup); The Operator Panel - Fuji Xerox DocuPrint CM405 df User Manual

Installing Print Driver on Computers Running
Windows
This section includes:
• "Identifying Print Driver Pre-install Status (For Network Connection Setup)" on page 100
• "Inserting the CD-ROM" on page 102
• "USB Connection Setup" on page 102
• "Network Connection Setup" on page 105
• "Setting Up for Shared Printing" on page 111
NOTE:
• The fax driver is installed with the PCL 6 driver.
Identifying Print Driver Pre-install Status (For Network
Connection Setup)
Before installing the print driver on your computer, print the System Settings page to check the IP address of your
printer.
This section includes:
• "The Operator Panel" on page 100
• "Changing the Firewall Settings Before Installing Your Printer" on page 101

The Operator Panel

1
Press the (System) button.
2
Select Report / List.
3
Select System Settings, and then select Print.
The System Settings page is printed.
4
Find the IP address next to IP Address under Network Setup on the System Settings page.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then print the
System Settings page again.
If the IP address is not resolved automatically, see
100
Printer Connection and Software Installation
"Assigning an IP Address (for IPv4 Mode)" on page 98.