Job Timeout; Output Settings; Default Paper Size - Fuji Xerox DocuPrint CM405 df User Manual

Job Timeout

Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the
time-out time is exceeded.
Values:
Off
*
On

• Output Settings

Purpose:
To configure settings concerning output from the printer.

Default Paper Size

Purpose:
To specify the default paper size.
Values:
*1
A4
*1
Letter
*1
The default for Default Paper Size varies depending on region-specific factory default.
Print ID
Purpose:
To specify a location where the user ID is printed.
Values:
*
Off
Top Left
Top Right
Bottom Left
Bottom Right
NOTE:
• When you print on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose:
To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer
receives it. Text data is printed on A4 or Letter size paper.
Values:
Off
*
On
Disables the job time-out.
*
30 sec Sets the time the printer waits for data to arrive from the computer.
5-300 sec
Does not print the user ID.
Prints the user ID on the top left of the page.
Prints the user ID on the top right of the page.
Prints the user ID on the bottom left of the page.
Prints the user ID on the bottom right of the page.
Does not print the received data.
Prints the received data as text data.
Using the Operator Panel Menus and Keypad
319