Banding
Problem
The printed result has banding.
Auger Mark
Problem
The printed result has auger
mark.
390
Troubleshooting
Action
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 436
• "Installing the Drum Cartridges" on page 439
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Replace the fusing unit if you have a spare unit.
See also:
• "Replacing the Fusing Unit" on page 442
If the cause of the problem is not located, contact the Fuji Xerox local representative
office or an authorised dealer.
Replace the 2nd BTR, the belt unit, and the retard roller.
See also:
• "Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on page 445
If the cause of the problem is not located, contact the Fuji Xerox local representative
office or an authorised dealer.
Action
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 436
• "Installing the Drum Cartridges" on page 439
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.