System board and components
14.3.2.4 Software configuration
The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
14.3.3 Removing the UFM
Field Replaceable Unit
(FRU)
Tools: Philips PH0 / (+) No. 0 screw driver
14.3.3.1 Preliminary steps
"Disabling BitLocker functionality" on page 57
Ê
"Disabling SVOM boot watchdog functionality" on page 58
Ê
"Locating the defective server" on page 41
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting power cords" on page 44
Ê
"Getting access to the component" on page 46
Ê
278
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX4770 M1