Cluster Management Configuration Example - H3C S5120-SI Series Operation Manual

To do...
Display the current blacklist of
the cluster
Display the information of
candidate devices
Display the current topology
information
Display members in a cluster
Clear NDP statistics
Support for the display ntdp single-device command depends on the device model.

Cluster Management Configuration Example

Network requirements
Three switches form cluster abc, whose management VLAN is VLAN 1. In the cluster, Switch B
serves as the management device (Administrator), whose network management interface is
VLAN-interface 1; Switch A and Switch C are the member devices (Member).
All the devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24,
and use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
Add the device whose MAC address is 000f-e201-0013 to the blacklist.
Use the command...
display cluster black-list
display cluster candidates
[ mac-address mac-address |
verbose ]
display cluster
current-topology
[ mac-address mac-address
[ to-mac-address
mac-address ] | member-id
member-number
[ to-member-id
member-number ] ]
display cluster members
[ member-number | verbose ]
reset ndp statistics
[ interface interface-list ]
1-16
Remarks
Available in user view