Cluster Management Configuration Examples; Cluster Management Configuration Example One - H3C S5510 Series Operation Manual

Operation Manual – Cluster Management
H3C S3610&S5510 Series Ethernet Switches

1.9 Cluster Management Configuration Examples

1.9.1 Cluster Management Configuration Example One

I. Network requirements
Three switches form a cluster, in which:
One device serves as the management device.
The other two are the member devices.
The specific requirements are as follows:
The management device is connected to the external network through its Ethernet
1/0/1 port. The two member devices are connected to Ethernet 1/0/2 and Ethernet
1/0/3 ports of the management device.
Ethernet 1/0/1 port of the management device belongs to VLAN 2, whose interface
IP address is 163.172.55.1/24. The network management interface of the
management device is VLAN-interface 2. VLAN 2 is the network management
(NM) interface of the management device.
All the devices in the cluster use the same FTP server and TFTP server, which
share one IP address: 63.172.55.1/24.
The SNMP NMS and log host share one IP address: 69.172.55.4/24.
The management VLAN of the cluster is VLAN 10.
Add the device whose MAC address is 00e0-fc01-0013 to the blacklist.
II. Network diagram
FTP server/TFTP
server
63.172.55.1/24
Figure 1-4 Network diagram for cluster management
Network
Vlan-int2
Eth1/1
163.172.55.1/24
Eth1/3
Cluster
Eth1/1
Member device
MAC: 00e0.fc01.0012
MAC:00e0.fc01.0011
Chapter 1 Cluster Management Configuration
SNMP host/logging
host
69.172.55.4/24
Management device
Eth1/2
Eth1/1
Member device
1-22