How To Replace Fan Motor - Panasonic S-36PU1E5A Technical Data & Service Manual

5-7. How to Replace Fan Motor

Removing Fan Motor
1. Turn off the power supply.
WARNING
ELECTRICAL SHOCK CAN CAUSE
SEVERE PERSONAL INJURY OR DEATH.
2. Remove the lid of the electrical component box.
(Screws x 5 locations: Fig. 1)
Make sure the PC board should not be electrified.
Power supply LED should be lit off on PC board.
(Fig. 2)
3. Disconnect the interconnector in the middle
of the wiring to the fan motor. (Fig. 3)
4. Remove the bottom plate. (Fig. 4)
5. Disconnect two (2) clutches (Fig. 5a) fixing the lower side of the fan casing
and pull out the protrusion part (Fig. 5c) placed onto the side of the main unit (Fig. 5b).
Then remove the fan casing.
Screws x 5 locations
r P t o u r s o i n p a t r
Fig. 5c
5-71
Lid of electrical
component box
Fig. 1
Power LED
Fig. 2
Connector
Fig. 3
Screw
Bottom plate
Fig. 4
Fan casing
M a
Fig. 5b
5
Clutches
Fig. 5a
n i u n t i s d i e