Panasonic S-36PU1E5A Technical Data & Service Manual page 310

1
Remote controller setting mode
To set the remote controller main/sub setting or change the sensor, follow the steps below.
(1) Press both
(2) Select CODE No. with
(3) Change DATA with
(4) Press . Finally, press
* DATA is memorized in the RCU. (DATA setting will not be changed even when the power is turned off.)
* Make sure to set [Normal] for RCU. CK.
CODE
ITEM
and buttons on the remote controller for more than 4 seconds together.
/ ( ) buttons.
/ (TIMER) buttons.
.
ITEM
RCU. Main/Sub
Clock display
RCU. CK
Room temperature sensor
DATA
Sub Main
24 hours 12 hours (AM/PM)
RCU. CK Normal
Main unit RCU
1-300