Panasonic S-36PU1E5A Technical Data & Service Manual page 280

R410a models

Hide thumbs Also See for S-36PU1E5A:

Table of Contents

How to connect wiring to the terminal

Air Purging with a Vacuum Pump (for Test Run) Preparation

(1) Cut the wire end with cutting pliers, then strip the

insulation to expose the stranded wire about 10 mm

and tightly twist the wire ends.

(2) Using a Phillips head screwdriver, remove the terminal screw(s) on the terminal board.

(3) Using a ring connector fastener or pliers, securely clamp each stripped wire end with a ring pressure terminal.

(4) Put the removed terminal screw through the ring

pressure terminal and then replace and tighten the

terminal screw using a screwdriver.

Assembling parts for outdoor unit cover

(Field supply)

Cord clamp C

Stranded wire

Ring pressure

Terminal board

Terminal board

Cord clamp A

Cord clamp B

Terminal cover

Chapters

Table of Contents