Installing The Cassette Heater; 1Unpacking And Checking The Contents; 2Preparing The Host Machine - Canon iR2020 Series Installation Procedure

Chapter 1
1.7 Installing the Cassette
Heater
1.7.1 Unpacking
Checking the Contents
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing the cassette heater, make sure the
heater PCB has been installed.
1) Prepare the following parts.
[1]
F-1-90
[1] Cassette heater
[2] P tightening screw (M4x8)
1.7.2 Preparing the Host
Machine
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing the cassette heater unit 30, make sure
the host machine is turned off. If it is turned on, go
through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power out-
let).
3. Disconnect the power cable.
38
and
0011-3181
[2]
1 pc.
1 pc.
0011-3182
F-1-91
1) Remove the four screws [1], and then detach the
rear cover [2].
F-1-92
1.7.3 Installing the Cas-
sette Heater
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Insert the cassette heater [1] from behind the host
machine.
0011-3620