Quick Link Sett 15~16P - GRAUPNER HOT TG/mz-12 Operating Instruction

press
press
press
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
- Quick link sett
The quick link sett function allows to adjust the D/R expo value and assign the corresponding
switch to cope with the unexpected situation such as the flight with the strong wind. Since the
ENT
adjusted value is activated by moving the switch, you can cope with the crisis with just one switch.
TEL VIW
It makes you operating the flight much easier. You can select take off, thermal, dist, speed, acro,
ESC
landing, air-tor, test at quick2 and quick3.
Press the direction button to select the quick link sett then press the ENT button to access the
function. Press the direction button to select the qucik2 line or the quick3 line then press the ENT
button to highlight the value. Press the direction button to select the desired value (take off, ther-
ENT
mal, dist, speed, acro, landing, air-tor, test at quick2 and quick3). Press the ENT button to remove
TEL VIW
the highlight then press the direction button to select the hyphen. If you press the ENT button, the
ESC popup message "push desired switch into position on" appears. Move the switch to the desired
position then the corresponding value appears. Press the ESC button to get back to the m.type +
quick screen then the quick link programming is completed.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
15