Postscript Menu; Pcl Emul Menu - Lexmark CS410 Series User Manual

Understanding the printer menus

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Image Smoothing
On
Off

PCL Emul menu

Use
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
Symbol Set
10U PC‑8
12U PC‑850
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Allow users to disable the SysStart file.
Note: Off is the factory default setting.
Enhance the contrast and sharpness of low‑resolution images and smoothen
their color transitions.
Notes:
•
Off is the factory default setting.
•
Image Smoothing has no effect on images that are 300 dpi or higher in
resolution.
To
Specify the set of fonts used by the Font Name menu.
Notes:
• "Resident" is the factory default setting. Resident shows the factory
default set of fonts downloaded in the RAM.
•
"Flash" and "Disk" settings show all fonts resident in that option.
•
The flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
•
"Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
Specify the symbol set for each font name.
Notes:
• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
• A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
90