Table of Contents
Advertisement
Scanning
Scanning
Scanning to an FTP server
1
Load the original document into the ADF tray or on the scanner glass.
2
From the home screen, touch FTP, and then enter the needed information.
3
If necessary, configure other FTP settings.
4
Send the FTP job.
Creating an FTP shortcut
1
From the home screen, touch FTP.
2
Enter the FTP server address, and then touch
3
Enter a shortcut name.
4
Apply the changes.
Scanning to a flash drive
1
Load an original document into the ADF tray or on the scanner glass.
2
Insert the flash drive.
3
Touch Scan to USB and adjust the settings if necessary.
Note: If the USB Drive screen does not appear, then touch USB Drive on the home screen.
4
Scan the document.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the flash drive or
the printer in the area shown while actively printing, reading, or writing from the memory device.
.
55
Advertisement
Table of Contents
