E-mailing
Sending an e-mail
Before you begin, make sure that the SMTP settings are configured. For more information, see
the e‑mail SMTP settings" on page
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail, and then enter the needed information.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using a shortcut number
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Shortcut Center > E‑mail.
3
Select the shortcut number.
4
Send the e‑mail.
Creating an e-mail shortcut
1
From the home screen, touch E‑mail.
2
Configure the settings, and then touch
3
Create a shortcut.
55.
.
63
"Configuring