Directory Status (May Not Appear For Certain Countries) - Paradyne COMSPHERE 3920Plus Technical Reference Manual

COMSPHERE 392xPlus Modems

Directory Status (may not appear for certain countries)

Directory Status displays the status of each directory location.
To access Directory Status from the Call Setup branch, make the following selections:
Press the
Directory_Status.
Press the
Directory_Status.
Select Nxt to display other directory locations.
The status of a directory location can be:
No Number
Allowed
Delayed
Forbidden
Delayed and Forbidden only appear in countries with specific dialing requirements.
When a number is delayed, press the
The delayed and forbidden conditions can be cleared by power cycling the modem. This is
actually the only way to re-enable a forbidden number. Deleting a number from a directory
location and reentering it into another directory location will not change the delayed or
forbidden condition of this number.
To exit this function and remain in the Call Setup branch, press the
to the Top-Level menu, press the
10-10
key until Directory_Status appears. Press any function key to select
Call Setup: <
Directory_Status
F3
F1 F2
key until Directory_Status appears. Press any function key to select
Number Status
Nxt 01:Allowed
F3
F1 F2
The directory location is empty.
The number in this directory location may be dialed at this time.
The number in this directory location may be dialed later.
The number in this directory location may not be dialed.
key.
October 1998
key to display the value of the delay in minutes.
key. To exit and return
3920-A2-GH30-40