Paradyne COMSPHERE 3920Plus Technical Reference Manual page 274

COMSPHERE 392xPlus Modems
Symptom
The MUX configuration option does
not appear under DTE Interface.
B-6
Table B-8
MUX Operation
The Dial Access Security feature is enabled. Verify that both the Answer and
Originate security options are disabled. Refer to sections
Set Orig Sec in Chapter 12, Security.
The Dial Line Rate or LeasedLine Rate configuration option is set to an invalid
modulation. Refer to the Dial Line or Leased Line configuration option in the
Multiport Mode section of Chapter 5, Configure Branch, for the valid rates.
October 1998
Action
Set Answer Sec and
3920-A2-GH30-40