Paradyne COMSPHERE 3920Plus Technical Reference Manual page 89

Configure Branch
Table 5-1
(4 of 9)
DTE Interface Configuration Options — Multiport Mode l
Rate at 14.4 K
Nxt Disable 14400 12000 9600 7200 4800 2400 1200
Rate at 14.4K. When the modem rate is 14,400 bps the port rate will be as selected by this configuration option (Disable
or 14400 to 1200). The total for all ports cannot exceed the modem rate of 14,400 bps.
Rate at 12.0 K
Nxt Disable 12000 9600 7200 4800 2400 1200
Rate at 12.0K. When the modem rate is 12,000 bps the port rate will be as selected by this configuration option (Disable
or 12000 to 1200). The total for all ports cannot exceed the modem rate of 12,000 bps.
Rate at 9600
Nxt Disable 9600 7200 4800 2400 1200
Rate at 9600. When the modem rate is 9600 bps the port rate will be as selected by this configuration option (Disable or
9600 to 1200). The total for all ports cannot exceed the modem rate of 9600 bps.
Rate at 7200
Nxt Disable 7200 4800 2400 1200
Rate at 7200. When the modem rate is 7200 bps the port rate will be as selected by this configuration option (Disable or
7200 to 1200). The total for all ports cannot exceed the modem rate of 7200 bps.
Rate at 4800
Nxt Disable 4800 2400 1200
Rate at 4800. When the modem rate is 4800 bps the port rate will be as selected by this configuration option (Disable or
4800 to 1200). The total for all ports cannot exceed the modem rate of 4800 bps.
Rate at 2400
End Disable 2400 1200
Rate at 2400. When the modem rate is 2400 bps the port rate will be as selected by this configuration option (Disable or
2400 to 1200). The total for all ports cannot exceed the modem rate of 2400 bps.
Port Async Sub-Group (One for Each Port)
Async/Sync Mode: Sync
Nxt Sync Async
Asynchronous/Synchronous Mode. Determines whether the port operates in Asynchronous mode or Synchronous
mode.
NOTE: When using the TMp or Sync factory templates and MUX Mode is disabled, Port 1 is set to Sync mode.
Async DTE Rate: =Sync
Nxt =Sync 150 300 600 1800
This configuration option only appears when Async/Sync Mode is configured for Async.
Asynchronous DTE Data Rate. Identifies the asynchronous DTE's operating rate to the modem. The asynchronous rate
must be less than or equal to the synchronous port rate.
NOTE: When using 150, 300 or 600 bps line rates, the port rate must be set to a minimum of 1200 bps.
NOTE: When using 1800 bps line rate, the port rate must be set to 2400 bps.
=Sync – The asynchronous data is equal to the synchronous rate.
3920-A2-GH30-40 October 1998 5-13