Paradyne COMSPHERE 3920Plus Technical Reference Manual page 231

For Trellis Multipoint (TMp) control modems, you must specify the network management
address of a tributary modem. The following display does not appear in point-to-point or
Trellis Multipoint tributary modems.
The address field (xxx) displays the network management address of the modem to be accessed
by the Remote function. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
cursor ( _ ) under the digit to be incremented. Press the F2 ( " ) key to increment the digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function. The following display
does not appear in point-to-point modems.
The password field (yyyyyyyy) displays the remote access password of the modem to be
accessed by the Remote function.
To increment digits within the password field (yyyyyyyy), use the
the cursor ( _ ) under the digit to be incremented. Press the F2 ( " ) key to increment the digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
or
If operation over the secondary channel is desired, press any function key to select the secondary
channel. Secondary channel only appears if using V.34, V.32terbo, V.32bis, V.32 or TMp
modulation. If operation over the primary channel is desired, press the
3920-A2-GH30-40
Choose Address:
"xxx
Ent
F1 F2 F3
Choose Password:
"yyyyyyyy
Ent
F1 F2 F3
Select Channel >
Secondary
F3
F1 F2
Select Channel <
Prim (data blckd)
F3
F1 F2
October 1998
Remote Branch
and keys to position the
and keys to position
key until primary
13-3