Paradyne COMSPHERE 3920Plus Technical Reference Manual page 279

Comsphere 392 plus series
Hide thumbs Also See for COMSPHERE 3920Plus:
Table of Contents

Advertisement

For 2-wire leased-line connections to a JM8 network interface, use an 8-position to 6-position
crossover cable (Figure C-3) according to the following FCC requirements:
"The RJ series of jacks should not be used for connecting data equipment to nonswitched
private line networks — specifically, the service equivalents of the pre-divestiture Series 3002
(Category II, Tariff #260) service. There is a substantial difference in transmit levels permitted
in the private line service and those permitted in the public switched network. The industry
standard is now an 8-pin keyed modular jack known as the USOC JM8 (Bellcore Technical
Reference: TR-EOP-000242, Issue 1, released May 1985.) When ordering the installation of the
USOC JM8, specify the appropriate wiring options:
TEK leads are for loopback purposes.
A 50-pin version is being considered for multiple line connections."
8-POSITION
PLUG PIN NO.
1
2
3
4
5
6
7
8
Figure C-3. Wiring Diagram — 8-Position to 6-Position Crossover Cable
3920-A2-GH30-40
• 2-wire operations
• 4-wire operations w/o TEK leads
• 4-wire operations with TEK leads
October 1998
Pin Assignments
6-POSITION
PLUG PIN NO.
1
2
3
4
5
6
C-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comsphere 3921plus

Table of Contents