Entering Telephone Numbers And Dial Command Modifiers Into Directory Locations - Paradyne COMSPHERE 3920Plus Technical Reference Manual

COMSPHERE 392xPlus Modems

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
To add a telephone number to a directory location, make the following selections:
Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the
first character position.)
Select F2 ( " ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric
character.
Press the
Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to
To save the number just entered, scroll to the next directory location by selecting Nxt. The
number is now stored in nonvolatile memory.
Table 10-1
To exit this function and remain in the Call Setup branch, press the
to the Top-Level menu, press the
10-8
02:z
" #
Nxt
F3
F1 F2
02:z
" #
Nxt
F1 F2 F3
key to move the cursor to the next character position.
Table 10-1 for a list of valid dial command modifiers.)
01:9W5556789z
" #
Nxt
F1 F2 F3
describes what can be entered in directory locations.
October 1998
key.
key. To exit and return
3920-A2-GH30-40