COMSPHERE 392xPlus Modems
Record
Record is a troubleshooting tool used in conjunction with support personnel. This function
retrieves and reports any sequence faults to support personnel. A sequence fault is an irregular or
unexpected event.
There are two selections under Record: Display and Clear. Display allows up to eight sequence
fault messages that are recorded by the modem and displayed on the LCD in descending order. If
no sequence faults have occurred, then Modem O.K. appears.
Clear is used to remove all sequence fault messages from nonvolatile memory and the LCD.
To access Record from the Status branch, make the following selections:
Press the
To display sequence faults, select Display.
The LCD displays the first sequence fault field. (Sequence fault fields range from 1 to 8 and are
identified by a number in the upper right corner.) Press the
The message Modem O.K. appears if no sequence faults have occurred.
To remove sequence fault records from both the LCD and nonvolatile memory, select Clear. The
message Modem O.K. appears.
To exit this function and remain in the Status branch, press the
Top-Level menu, press the
4-16
Status:
Options
Record
F1
F2
F3
key until Record appears. Select Record.
Record Status
Display
Clear
F1
F2
F3
Record Number 1
Modem O.K.
F1
F2
F3
key.
October 1998
key to view the remaining fields.
key. To exit and return to the
3920-A2-GH30-40