Paradyne COMSPHERE 3920Plus Technical Reference Manual page 352

COMSPHERE 392xPlus Modems
P
part numbers, 4-8
passwords
administrative, 12-6–12-7
remote access, 5-4–5-9, 5-31, 5-74, 13-2, 13-3, 13-4
security, 12-3–12-4, 12-16–12-17
pattern test, 8-8–8-10
Pause Time
Multiport mode, 5-20
Singleport mode, 5-50
phone. See telephone, external
phone numbers. See telephone numbers
pin assignments, C-2
PList (Poll List) branch, 3-9, 6-1–6-6
Point-to-Point Diagnostic modulation
dial
Multiport mode, 5-22
Singleport mode, 5-54
leased
Multiport mode, 5-26
Singleport mode, 5-59
polling sequence, 5-12
Port Rate, 5-12
Port Transmit Clock Source, 5-18
Port4 Ext Alarm, 5-11
S-Register, 14-20
power consumption, 1-13
power supply connection, 2-6–2-7
power-up self-test, 2-13
Proactive Retrain
Multiport Mode, 5-24, 5-56
S-Register, 14-19
public switched telephone network (PSTN). See dial
Pulse Dial, 14-7
pulse-code modulation, 4-7
Q
quick configuration display, 1-9, 3-9, 3-14
R
Rate Auto Originate
Multiport mode, 5-27
S-Register, 14-19
Singleport mode, 5-60
rates
automatic control, 5-58
dial line, 1-14, 5-22, 5-53, 14-22
leased line, 1-14, 5-57, 14-23
rear connector plate, 1-5
rear panel connectors, C-2
Receive Remote Loopback Response
Multiport mode, 5-17
Singleport mode, 5-72
Record, Status branch, 4-16–4-18
Reduced Asynchronous Buffer Size, 5-71
S-Register, 14-31
Index-6
Remote
access password, 5-4–5-9, 5-31, 5-74, 13-2, 13-3,
13-4
S-Registers, 14-25
branch, 3-9, 13-1–13-4
remote digital loopback test, 8-5–8-6
Repeat Last Command, 14-6
requirements
ac power, 1-13
government, 1-10–1-12
Reset and Load Active, AT command, 14-8
reset control, 7-3
result codes
enable/disable, 5-47, 14-7
extended, 5-47, 14-8
list, 14-1, 14-3–14-5
numeric or verbal, 5-48, 14-7
retrain
2W Leased Line Signal Quality, 5-27, 5-60
automatic
Multiport Mode, 5-24, 5-56
S-Register, 14-19
ringer equivalence number (REN), 1-11
RTS Action
AT command, 14-11
Multiport mode, 5-15
Singleport mode, 5-40
RTS Antistream
Multiport mode, 5-15
S-Register, 14-27
Singleport mode, 5-40
RTS-to-CTS Delay, S-Register, 14-19
RTS/CTS Delay
Multiport mode, 5-16
SIngleport mode, 5-41
S
S-Register list, 14-16–14-32
S-Register
change command, 14-7
display command, 14-7
saving, configuration options, 5-4
SDC (synchronous data compression), H-1
Bit Encoding, 5-69
S-Register, 14-21
Delay Minimization, 5-69
AT command, 14-14
enable/disable, AT command, 14-15
Idle Fill, 5-69
S-Register, 14-21
negotiation, 5-68
S-Register, 14-21
status, 4-10
Sync Comp Mode, 5-68
Sync DTE CRC, 5-69
S-Register, 14-18
Sync DTE Rate, S-Register, 14-20
SDCP. See diagnostic control panel
SDLC, 5-68
October 1998 3920-A2-GH30-40