Mounting The Bridge/Router; Mounting Kit; Installing On A Tabletop - 3Com NETBuilder SI Using Manual

Mounting the
Bridge/Router

Mounting Kit

Installing on a
Tabletop
You can mount your bridge/router on a tabletop, stack several with
brackets, or mount the bridge/router in a rack.
The mounting kit contains the following hardware:
Figure 4 Mounting Kit Contents
Two brackets
Four 8-32 Phillips
flathead screws for use
when stacking bridge/routers
If you plan to install your
bridge/router on a tabletop, attach
the rubber feet as shown.

Mounting the Bridge/Router

Four adhesive-backed
rubber feet
Attach feet to corners
Flex plastic sheet until
feet pop loose
31
of chassis bottom