Scenario 3: Fully Meshed Topology; Configuring X.25 - 3Com NETBuilder SI Using Manual

Scenario 3: Fully
Meshed Topology
Configuring X.25
A fully meshed topology consists of bridge/routers that are connected
directly to every other bridge/router. Between each bridge/router, you
must order a Frame Relay circuit from the service provider.
No configuration is required for this scenario.
!6 (port)
!5 (path)
CSU/DSU
CSU/DSU
This section describes two X.25 scenarios:
Scenario 1: Multiple Destinations, Nonmeshed
Scenario 2: Fully Meshed Topology
See Using Enterprise OS Software to modify the default DTE profile, to
create a permanent virtual circuit (PVC), or to configure connection
services.
CSU/DSU
Frame Relay
CSU/DSU
Configuring X.25 97