3Com NETBuilder SI Using Manual page 127

Amber
Status
SYSTEM
Meaning: The software image file has been deleted or the boot source
and image names do not match.
Action: Follow these steps:
1 At the monitor prompt, enter:
DF <path>
The default path is:
DF /primary
The image is called boot.68k.
2 If the image has been deleted, reload the software using Appendix B.
3 If the image has a different name or is in a different directory, boot from
the image using:
BT [<path>]<filename>
Amber
Status
SYSTEM
Meaning: File too large.
Action: Check to see if the file is larger than available memory. Turn
the power off and then on again to retry the system software
Run
Aux
Load
Test
Power
Fwd
/Fault
Run
Aux
Load
Test
Power
Fwd
/Fault
Error LED Meanings 127
Amber
Amber