3Com NETBuilder SI Using Manual page 140

140 A A: T
PPENDIX ROUBLESHOOTING
3 Start remote loopback test using:
RemtLpbck !<path> -PAth [Status | RemtCsuLbkStart |
RemtDsuLbkStart | RemtCsuLbkEnd | RemtDsuLbkEnd ]
To start the remote CSU loopback test on path 2, enter:
RemtLpbck !3 -PAth RemtCsuLbkStart
To start the remote DSU loopback test on path 2, enter:
RemtLpbck !3 -PAth RemtDsuLbkStart
4 To view the status of the loopback test in progress, enter:
RemtLpBck !3 -PAth Status
The following fields are displayed:
Loopback State :
Loopback Type :
Loopback Time :
Loopback Result :
5 To terminate the loopback test, enter:
RemtLpBck !3 -PAth RemtCsuLbkEnd
or
RemtLpBck !3 -PAth RemtDsuLbkEnd