Scenario 1: Multiple Destinations, Nonmeshed - 3Com NETBuilder SI Using Manual

94 C 7: A
HAPTER DVANCED
Scenario 1: Multiple
Destinations,
Nonmeshed
C P
ONFIGURATION OF ORTS AND
A nonmeshed topology consists of bridge/routers that are not connected
directly to every other bridge/router, like in a Boundary Routing topology.
To achieve connectivity between all bridge/routers, create virtual ports for
each remote site on the central site so traffic can pass from one remote
site to another over the same parent port.
!6 (port)
!5 (path)
CSU/DSU
@90
CSU/DSU
P
ATHS
One serial port connects to
multiple destinations in a
nonmeshed topology.
Start here
Create a virtual port for each destination using the DLCIs:
ADD !V1 -PORT VirtualPort 5@90
ADD !V2 -PORT VirtualPort 5@100
Syntax: ADD !<port> -PORT VirtualPort <path><DLCI>
Done
!V2
!V1
@100
Frame
Relay
CSU/DSU
Boundary routers