Scenario 2: Multiple Destinations - 3Com NETBuilder SI Using Manual

87

Scenario 2: Multiple Destinations

If you need to connect to multiple destinations, use a dial pool that
contains one or both serial paths. The following scenarios show how a
model 45x bridge/router using a dial pool can connect to three different
bridge/routers. You cannot accept phone calls from other vendors'
bridge/routers when using a dial pool.
See "Configuring Dial-Up Lines with PPP" on page 79 for information
about using the built-in ISDN port and a TA in a dial pool.
The dial pool does not have to contain both serial paths. You can use one
path in the dial pool to connect to multiple destinations, one at a time.
Model 45x
!4 (path)
!3 (path)
modem 28.8 K modem 19.2 K
Dial pool
"Andover"
"Princeton"
19.2 K
"PaloAlto"
28.8 K
28.8 K
1-619-555-2222 1-650-555-6969
1-609-555-6000