Using Statistics On The T1/Ft1 Rj-48 Telco Port (46X And 56X); Network Statistics - 3Com NETBuilder SI Using Manual

116 C 9: C
HAPTER USTOMIZING
Using Statistics on
the T1/FT1 RJ-48
Telco Port (46x and
56x)

Network Statistics

Y S
OUR OFTWARE
The T1/FT1 RJ-48 Telco port reports 24 hour statistics in 15 minute
samples. These statistics are cumulative from the last reboot or the last
time these statistics were flushed, whichever is later.
To view the network statistics for the CSU/DSU path, use:
SHow !<path> -PATH WanCounters
To view the user statistics for the CSU/DSU interface, use:
SHow !<path> -PATH UserCounters
The displays look similar to the following example:
CUMULATIVE STATISTICS SINCE LAST FLUSHED OR REBOOTED+
ES 00001
SES 00019K
UAS 00005
BES 00010
CSS 00020
LOFC 00010
EFS 00245M
LAST 24 HOURS STATISTICS IN 15 MINUTE SAMPLES
00:15 00:30
00000 00000 00000
ES
00000 00000 00000
SES
00900 00900 00900
UAS
00900 00900 00900
BES
00900 00000 00000
CSS
LOFC 00000 00000 00000
00000 00000 00000
EFS
The error definitions are:
ES The number of errored seconds.
SES The number of severely errored seconds.
UAS The number of unavailable seconds.
BES The number of bursty errored seconds.
CSS The number of controlled slip errored seconds.
LOFC Loss of frame count
EFS The number of error free seconds
BPV The number of bipolar violations (or code violations).
LOS The number of "No pulses received at Network Interface"
OOF The number of "No framing pattern sync at Network Interface"
00:45 01:00 01:15
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00900 00900 00900 00900 00900 00900
00900 00900 00900 00900 00900 00900
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
01:30 01:45 02:00 02:00