Full And Abbreviated Syntax Examples - 3Com NETBuilder SI Using Manual

Table 18 Command Syntax Symbols (continued)
Symbol Description
vertical bar | Separates mutually exclusive items in a list, one of which must be entered. For example, in the
syntax:
SET ScreenLength = [None | <line>(6–100)]
you can specify either the keyword None or enter a number between 6 and 100 when
entering the command.
ellipsis ... Following a parameter name or value, indicates that one or more additional arguments may
be specified on the same command line. For example, in the syntax:
ADD !<port> -IP SecAuthIn <authority> [<authority> ...] [ANY]
you can specify multiple authorities (GENSER, SIOP, SCI, NSA, DOE, NONE) when entering
the command.
hyphen - A letter preceded by a hyphen represents a command option. Also, when you enter a service
name as part of the command, you must precede the service name with a hyphen. For
example, in the command:
SETDefault -BRidge CONTrol = Bridge
the hyphen must be included with the service name BRidge when entering the command.
braces { } Enclose a list of values, one of which must be entered. For example, in the syntax:
SETDefault !<subaddr #> -Gateway SubAddrMap = {(<IPaddr> | <PSAPaddr>) |
None}
you must enter either an IP address, presentation service access point (PSAP) address, or the
keyword None when entering the command.
exclamation mark ! A number preceded by an exclamation mark represents a port, virtual port, or path number.
For example, in the syntax:
SHow [!<port>] -DECnet CONFiguration
the exclamation mark must be included before the port number when entering the
command.
Full and
Abbreviated Syntax
Examples
The following examples show full form first followed by the abbreviated
command syntax.
The full form syntax:
ADD !<port> -NRIP AdvToNeighbor <network>%<MAC address> [...]
can be abbreviated to:
ADD !<port> -NRIP ATN <network>%<MAC address> [...]

Full and Abbreviated Syntax Examples

155