Year 2000 Compliance - 3Com NETBuilder SI Using Manual

16 A T G
BOUT HIS UIDE
Year 2000
Compliance
Table 2 Text Conventions
Convention
Screen displays This typeface represents information as it appears on the
Syntax
Commands
The words "enter"
and "type"
Keyboard key names If you must press two or more keys simultaneously, the key
Words in italics
For information on Year 2000 compliance and 3Com products, visit the
3Com Year 2000 Web page:
http://www.3com.com/products/yr2000.html
Description
screen.
Evaluate the syntax provided and supply the appropriate
values. Placeholders for values you must supply appear in
angle brackets. Example:
Enable RIPIP using:
SETDefault !<port> -RIPIP CONTrol = Listen
In this example, you must supply a port number for <port>.
Enter the command exactly as shown in text and press the
Return or Enter key. Example:
To remove the IP address, enter:
SETDefault !0 -IP NETaddr = 0.0.0.0
This guide always gives the full form of a command in
uppercase and lowercase letters. However, you can
abbreviate commands by entering only the uppercase letters
and the appropriate value. Commands are not case-sensitive.
When you see the word "enter" in this guide, you must type
something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says "type."
names are linked with a plus sign (+). Example:
Press Ctrl+Alt+Del
Italics are used to:
Emphasize a point.
Denote a new term at the place where it is defined in the
text.
Identify menu names, menu commands, and software
button names. Examples:
From the Help menu, select Contents.
Click OK.