Using Statistics On The 56/64 Kbps Csu/Dsu Port (45X And 55X) - 3Com NETBuilder SI Using Manual

Using Statistics on
the 56/64 Kbps
CSU/DSU Port
(45x and 55x)
SevErrSecs
ErrSecs
ErrFreeSecs 00000 00000 00000
AvailSecs
CodeViolate 00000 00000 00000
LossofSig
OutofFrame
RemoteLback 00000 00000 00000
SevErrSecs:
ErrSecs:
ErrFreeSecs:
AvailSecs:
CodeViolate:
LossofSig:
OutofFrame:
RemoteLBack: The number of loopbacks initiated by a remote site.

Using Statistics on the 56/64 Kbps CSU/DSU Port (45x and 55x)

The 56/64 Kbps CSU/DSU port reports 24 hour statistics in 15 minute
samples. These statistics are cumulative from the last reboot or the last
time these statistics were flushed, whichever is later.
To view the statistics for the CSU/DSU path, enter:
SHow !3 -PATH WanCounters
The display looks similar to the following example:
CUMULATIVE STATISTICS SINCE LAST FLUSHED OR REBOOTED+
SevErrSecs
ErrSecs
ErrFreeSecs
AvailSecs
CodeViolate
LossofSig
OutofFrame
RemoteLback
LAST 24 HOURS STATISTICS IN 15 MINUTE SAMPLES
00:15 00:30
00000 00000 00000
00000 00000 00000
00000 00000 00000
00000 00000 00000
00000 00000 00000
The error definitions are:
The number of seconds of severe errors.
The number of seconds with errors.
The number of error-free seconds.
The number of seconds available for normal operation.
The number of code violations.
The number of "No pulses received at the network interface".
The number of "No framing pattern sync at the network interface".
To flush the statistics displayed by the previous command, enter:
FLush !3 -PATH WanCounter
0019K
00020K
00245M
00245M
00168K
00000
00414K
00000
00:45 01:00 01:15
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
00000 00000 00000 00000 00000 00000
01:30 01:45 02:00 02:00
115