Erasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta 7222 User Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special originals,
such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the
platen glass. The exposed glass area outside the borders of the original will not be
copied.
Specifications for Non-Image Area Erase
❒ Use the platen glass only. Keep RADF or platen cover open throughout the
procedure.
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, Sort, Staple, Group, E-SORT
+Sort, E-SORT+Group, Mixed Original, Folded Original, Non-Standard Size, Sheet/
Cover Insertion, Chapter, Combination, Booklet, Image Insert, Flip Side 2, Reverse
Image, Image Shift, Stamp, Overlay
Set original
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Non-Image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
Non-Image Area Erase
General copying
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-27