Selecting The Paper Setting; Selecting The Paper Setting Automatically ("Auto Paper" Setting); Selecting The Paper Manually; Selecting The Manual Bypass Tray ("Bypass" Setting) - Konica Minolta 8020 User Manual

5.4 Selecting the Paper Setting

5.4 Selecting the Paper Setting
The paper used for making copies can be selected.
There are three ways of selecting the paper.
G Automatic paper selection ("Auto Paper" setting)
G Manual paper selection
G Manual bypass tray selection ("Bypass" setting)

Selecting the Paper Setting Automatically ("Auto Paper" Setting)

G
The most appropriate paper size based on the size of the document loaded and the specified zoom
ratio is automatically selected.
G However, if the paper in a drawer is specified as special paper, the paper in that drawer is not selected
with the "Auto Paper" setting.
"Specialty Paper" function
If the paper in a drawer is specified as special paper, the paper in that drawer is not automatically selected
with the Paper setting "Auto Paper". The "Specialty Paper" function is useful if special paper is loaded into
a paper drawer.
For more details, refer to "To set the "Specialty Paper" function" in chapter 5 "Utility Mode Operations" of
the Administrator Operations volume.

Selecting the Paper Manually

G The drawer containing the appropriate paper that you wish to use can be selected.

Selecting the Manual Bypass Tray ("Bypass" Setting)

G
Copies can be made onto the paper loaded into the manual bypass tray.

Small-Sized Documents

If a document that is too small to be automatically detected is loaded with the Paper setting "Auto Paper"
selected, copies cannot be made. However, changing the setting of the "Auto-select Paper for Small
Original" function on the User's Choice: 2 screen allows copying to begin even if the paper size cannot
automatically be detected. For more details, refer to "Specifying Default Settings ("User's Choice"
Functions)" of "Utility Mode Operations" in the Administrator Operations volume.
Konica 8020/8031
5
5-11