Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Barge
Block external to
external transfer
Call display
restrictions
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Description
Allows a user to join an in-progress call on
a shared line. Phones support Barge in two
conference modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
Prevents users from transferring an external
call to another external number.
Determines the information that will
display for calling or connected lines,
depending on the parties who are involved
in the call.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to the:
Cisco Unified CallManager
•
Administration Guide,
Cisco Unified IP Phone
Configuration chapter
Cisco Unified CallManager
•
System Guide,
Cisco Unified IP Phones
chapter
Cisco Unified CallManager
•
Features and Services Guide,
Barge and Privacy chapter
For more information, refer to the
Cisco Unified CallManager
Features and Services Guide,
External Call Transfer Restrictions
chapter.
For more information, refer to the:
Cisco Unified CallManager
•
Administration Guide,
Cisco Unified IP Phone
Configuration chapter
Cisco Unified CallManager
•
System Guide, Understanding
Route Plans chapter
•
Cisco Unified CallManager
Features and Services Guide,
Call Display Restrictions
chapter
5-3