Installing Cisco Unified Ip Phones - Cisco 7906G Administration Manual

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-4 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in Cisco Unified
CallManager (continued)
Task
Add user information by
8.
configuring required fields
(optional).
Name (last)
–
User ID
–
Password (for User Options
–
web pages)
PIN (for use with Extension
–
Mobility
Associate a user with a phone
9.
(optional).

Installing Cisco Unified IP Phones

Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
1-22
Purpose
Adds user information to the
global directory for
Cisco Unified CallManager.
Note
Provides users with control over
their phone such as forwarding
calls or adding speed-dial
numbers or services.
Note
After you have added the phones to the Cisco Unified CallManager database, you
can complete the phone installation. You (or the phone users) can install the phone
at the users's location. The Cisco Unified IP Phone Installation Guide that ships
in the box with each phone provides directions for connecting the phone
footstand, handset, cables, and other accessories.
After the phone is connected to the network, the phone startup process begins and
the phone registers with Cisco Unified CallManager. To finish installing the
phone, configure the network settings on the phone depending on whether you
enable or disable DHCP service.
Chapter 1 An Overview of the Cisco Unified IP Phone
To search for a user in
the Corporate Directory,
you must add users to
Cisco Unified CallMana
ger.
Some phones, such as
those in conference
rooms, do not have an
associated user.
For More Information
Refer to the Cisco Unified
CallManager
Administration Guide,
Adding a New User
chapter.
See the "Adding Users to
Cisco Unified CallManag
er" section on page 5-16.
Refer to the Cisco Unified
CallManager
Administration Guide,
Adding a New User
chapter, "Associating
Devices to a User"
section.
OL-10008-01