Network Statistics Screen - Cisco 7906G Administration Manual

Unified ip phone for cisco unified callmanager 4.1(3)
Hide thumbs Also See for 7906G:
Table of Contents

Advertisement

Chapter 7
Status Menu
Table 7-4
Status Messages on the Cisco Unified IP Phones 7906G and 7911G (continued)
Message
TFTP server not
authorized
TFTP timeout

Network Statistics Screen

Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
7-16
Viewing Security Information, Model Information, Status, and Statistics on the Cisco Unified IP Phone
Description
The specified TFTP server
could not be found in the
phone's CTL.
TFTP server did not respond.
The Network Statistics screen displays information about the phone and network
performance.
Possible Explanation and Action
The DHCP server is not configured
properly and is not server the correct
TFTP server address. In this case, update
the TFTP server configuration to specify
the correct TFTP server.
If the phone is using a static IP address,
the phone may be configured with the
wrong TFTP server address. In this case,
enter the correct TFTP server address in
the Network Configuration menu on the
phone.
If the TFTP server address is correct,
there may be a problem with the CTL file.
In this case, run the CTL client and
update the CTL file, making sure that the
proper TFTP servers are included in this
file.
Network is busy—The errors should
resolve themselves when the network
load reduces.
No network connectivity between the
TFTP server and the phone—Verify the
network connections.
TFTP server is down—Check
configuration of TFTP server.
OL-10008-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7911g

Table of Contents