Cisco 7906G Administration Manual page 159

Chapter 7 Viewing Security Information, Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-4 Status Messages on the Cisco Unified IP Phones 7906G and 7911G (continued)
Message
TFTP access error
TFTP file not found
XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Description
TFTP server is pointing to a
directory that does not exist.
The requested load file (.bin)
was not found in the TFTPPath
directory.
Name of the configuration file. None. This is an informational message
Possible Explanation and Action
If you are using DHCP, verify that the
•
DHCP server is pointing to the correct
TFTP server.
If you are using static IP addresses, check
•
configuration of TFTP server. See the
"Network Configuration Menu" section
on page 4-7 for details on assigning a
TFTP server.
Check the load ID assigned to the phone (from
Cisco Unified CallManager, choose Device >
Phone). Verify that the TFTPPath directory
contains a .bin file with this load ID as the
name.
indicating the name of the configuration file
for the phone.
Status Menu
7-15