Appendix A
Providing Information to Users
How Users Access a Voice Messaging System
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
A user ID and default password needed to access the application.
•
These settings correspond to the values you entered when you added the user
to Cisco Unified CallManager (see the
Cisco Unified CallManager" section on page
A brief description of what a web-based, graphical user interface application
•
is, and how to access it with a web browser.
An overview of the tasks that users can accomplish using the web page.
•
You can also refer users to Customizing Your Cisco Unified IP Phone on the Web,
which is available at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Cisco Unified CallManager lets you integrate with many different voice mail
messaging systems, including the Cisco Unity voice messaging system. Because
you can integrate with a variety of systems, you must provide users with
information about how to use your specific system.
You should provide this information to each user:
How to access the voice mail messaging system account.
•
Make sure that you have used Cisco Unified CallManager to configure the
Messages menu or the Msgs softkey.
Initial password for accessing the voice messaging system.
•
Make sure that you have configured a default voice messaging system
password for all users.
How the phone indicates that voice messages are waiting.
•
Make sure that you have used Cisco Unified CallManager to set up a message
waiting indicator (MWI) method.
How Users Access a Voice Messaging System
"Adding Users to
5-16).
A-3