Cisco 7906G Administration Manual page 107

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network
Configuration port (labeled 10/100 SW). Valid
values:
•
•
•
•
•
If the phone is connected to a
switch, configure the port on the
switch to the same speed/duplex as
the phone, or configure both to
auto-negotiate.
If you change the setting of this
option, you must change the PC
Port Configuration option to the
same setting (applies to 7911G
only).
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Auto Negotiate
10 Half—10-BaseT/half
duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half
duplex
100 Full—100-BaseT/full
duplex
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Scroll to the SW Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and
3.
then press the Select softkey.
Press the Save softkey.
4.
4-13