Engine Top Access Covers - Rear Bath Models - Winnebago Ellipse User Manual

Propping the Bed Board
Aluminum Tube
Steel Frame
NOTE: When supporting the bed with a suitable
prop item (e.g. 6-ft. long 2x4 board),
make sure that the top of the board is
seated firmly against the aluminum tube
at the top of the bed board and make sure
the bottom of the board is seated firmly
against the steel frame on the floor for
security.
ENGINE TOP ACCESS COVERS
– REAR BATH MODELS
These covers are only removed if a complete
view of the engine is needed for inspection, or for
replacement or adjustment of upper engine parts.
The engine top covers are located beneath the
rear bath floor and lavatory cabinet, depending
on model.
Take precautions to protect carpet and interior
furnishings when removing engine covers. The
undersides of the engine covers could contain
DRIVING YOUR MOTOR HOME
deposits of oil and fuel or other engine fluids and
substances that could damage fabrics and interior
furnishings.
1. Remove bathroom rug to access rear engine
covers.
2. Using the engine access cover key (located on
your key ring), unlock the middle engine
cover lock by turning counter-clockwise.
Rear Engine Access Cover Lock
3. Remove unlocked engine access cover by
grasping the two silver engine cover handles
and pulling the cover up and out towards you.
Remove and set aside.
NOTE: Use care when removing the engine
access cover to avoid any possible
interior damage.
SECTION 3 –
3-25