Winnebago Ellipse User Manual page 90

SECTION 6 –
ELECTRICAL
Automatic Power Transfer Box
(Located inside or behind
utility compartment)
-Typical Installation
Automatic Generator Start (AGS)
The Automatic Generator Start feature
monitors house battery voltage and coach interior
temperature, and has the ability to automatically
start the Generator to help maintain full air
conditioning function and house battery charge.
You can manually start and stop the Generator
from the AGS Control Pad with a touch of a
button. The AGS Control Pad is also equipped
with an Hourmeter feature, which registers the
total number of hours that the Generator has been
operated.
Refer to the manufacturer's user guide
provided in your InfoCase for complete AGS
Control Pad features and operating instructions.
AGS Control Pad
(Located near monitor panel)
6-8
The following label is located near the 120-
volt house circuit breaker panel and at the
Generator to warn you to disconnect specific
electrical connections before servicing the
Generator and storing the coach.
See the AGS user guide provided in your
InfoCase for more information to help
understand the AGS feature and its operation
with your Generator.
Generator Basic Operation
To Start the Generator
Press and Hold the "Start/Preheat" button on
the AGS Control Pad until you hear the
Generator running smoothly, then release.
To Stop the Generator
Press and Hold the "Stop/Prime" button on the
AGS Control Pad until you hear the Generator
come to a full stop, then release.
• Press and • Press and
Hold to start Hold to stop
Generator Generator
NOTE: Some coaches are equipped with
multiple Generator operation switches,
which may be located on the AGS
• Press Up/Down to
scroll to desired
screen for Generator
Hourmeter reading