Radio In-Dash/Rearview Monitor System - Winnebago Ellipse User Manual

SECTION 3 –
DRIVING YOUR MOTOR HOME
Dual range motors provide lowering of either
two shades to visor height restriction when the
ignition is ON and lowers completely to cover the
entire windshield when the ignition is OFF.
The Chassis Battery Disconnect switch must
be ON to supply power to the solar/night shade.
NOTE: If power is gradually drained and falls
below the lower limit of 11-volts, the
motors could lose their electronic Set
Limits and will require reprogramming
once normal power has been restored.
Refer to the Solar/Night Shade
manufacturer's information provided in
your InfoCase.
Further Information
Refer to the manufacturer's user guide
provided in your InfoCase for complete operating
instructions, troubleshooting tips, and
maintenance care.
RADIO IN-DASH/REARVIEW
MONITOR SYSTEM
–If Equipped
Basic Operating Instructions
• POWER ON/OFF - Push
to turn ON or OFF. Push
and hold to turn screen OFF.
Touch screen to turn back
ON.
• MENU - Press to access USER SETTING
MENU. Press and hold access SYSTEM
SETUP MENU.
3-8
• AUDIO - Press and hold access AUDIO
MENU. Press to return to current playback
mode.
• CAM - Press to access CAMERA mode.
Press and hold access CAMERA SETTINGS
MENU.
• MUTE - Press to MUTE audio.
• EJECT - Press to EJECT
CD.
• DAY/NIGHT - Press to
switch between stored
DAY/NIGHT user settings.
Press and hold to access
AUTO DAY/NIGHT adjust.
• AUX IN - Connect portable
audio player.
• USB - Connect a USB Jump
Drive. NOT FOR IPOD
CONTROLS.
Rearview Monitor
The rearview monitor feature of this system
lets you see what is directly behind your coach
for safety and maneuvering assistance. Sideview
cameras also allow you to see what is beside you
before turning or changing lanes.
The monitor screen "wakes up" automatically
when transmission is shifted into reverse. A
microphone built into the rear camera lets you
hear warning sounds or verbal directions from an
assistant.
Sideview Cameras
The sideview cameras activate with the
corresponding turn signals and replace the rear
camera view on the monitor until the turn is
completed or the signal lever is canceled
manually.