Cd/Dvd Player - Bedroom - Winnebago Ellipse User Manual

• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be able to
skip previews if desired by pressing the
chapter "advance" button until you see the
main menu screen.
• When the main menu
screen appears, use the
arrow buttons on the
remote to select the
desired entry or press the ENTER or PLAY
buttons on the remote (or "Play" button on
DVD player) to begin playing the feature.
• Volume is adjusted with the DVD remote (or
volume control on DVD player).
TV Sound through Home Theater
Speakers
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to home theater
speakers for a richer sound quality, follow these
steps:
• Turn the TV and DVD player On.
• Select the TV channel you wish to watch.
• Place remote into DVD
Receiver mode - Press
DVD Receiver/TV button
twice, until button
illuminates to amber color.
• Press Function (FUNC)
button on DVD player or
Function/TV Source button
on remote to set DVD
player to "AUX IN 2".
• Turn TV and/or home
theater volume up.
• Press PL II button on
remote and toggle through
settings to change audio
mode on DVD player to
MATRIX.
ENTER
Turning TV Speakers On/Off
• Press MENU button on remote.
• Select SOUND option.
• Toggle to Speaker Select (External Speaker/
TV Speaker) to turn speakers on or off.
Dash Radio Sound through Home
Theater Speakers
–If Equipped
See "Radio – In-Dash" in Section 3.

CD/DVD PLAYER - BEDROOM

(& Stereo Radio Alarm Clock)
–If Equipped
The TV operates from 120-volt AC household
current only, so you must have either the
shoreline connected, the generator running, or the
inverter turned on (if equipped).
The DVD player is connected to the TV and
plays through the TV stereo speakers.
Set TV Sound Output
• Use the TV Menu button to set TV audio
output to Variable Audio Output (See TV
owner's manual for instructions.) This will
connect TV stereo sound output to the deluxe
speakers.
• Volume is adjusted with the TV remote or
volume buttons.
Set TV Video Input
• Turn TV and DVD player On.
• Press the SOURCE or INPUT button on the
TV or TV remote to select HDMI1.
• The TV screen will display the DVD player
logo when the correct input is selected.
SECTION 8 –
ENTERTAINMENT
8-3