Engine Top Access Covers - Rear - Winnebago Journey User Manual

ENGINE TOP ACCESS COVERS
– REAR
These covers are only removed if a complete
view of the engine is needed for inspection, or for
replacement or adjustment of upper engine parts.
The engine top covers are located beneath the
rear bed and wardrobe, depending on model.
Take precautions to protect carpet and interior
furnishings when removing engine covers. The
undersides of the engine covers could contain
deposits of oil and fuel or other engine fluids and
substances that could damage fabrics and interior
furnishings.
Models with "North-South" Beds
(Lengthwise to Coach)
• Remove the mattress from the bed and set
aside in another area of the coach.
• Remove the screws that fasten the foot end of
the bed board down to the bed base. (Note: If
bed is designed for storage below bed board,
these screws will not be present).
• Lift the hinged bed board upward against
wall. Support the bed board with a suitable
prop item as shown (if bed is not equipped
with struts).
CAUTION
A falling bed board can injure.
Assure the bed is properly
supported.
Refer to instructions for propping the
bed board.
• Unlatch the engine cover and remove for
access.
Models with "East-West" Beds
(Crosswise to Coach)
• Remove the mattress from the bed and set
aside in another area of the coach.
DRIVING YOUR MOTOR HOME
• Lift the hinged bed board upward against
wall. Support the bed board with a suitable
prop item as shown (if bed is not equipped
with struts).
CAUTION
A falling bed board can injure.
Assure the bed is properly
supported.
Refer to instructions for propping the
bed board.
• Unlatch the engine cover and remove for
access.
Accessing the Engine
Lift bed to
access rear
engine cover(s)
Typical View
Unlatch engine
cover(s) beneath
bed to access
engine
Typical View
SECTION 3 –
3-19