Front Tv Ignition Switch Interlock; Audio-Video System Basic Operation; Dvd Home Theater System - Winnebago Ellipse User Manual

Hide thumbs Also See for Ellipse:
Table of Contents

Advertisement

SECTION 8 –
ENTERTAINMENT
TV Signal Amplifier Power Switch
-Typical View
To Watch Cable TV
Power "OFF" the TV Signal Amplifier Power
switch. All TV's in the coach will now be
connected to the cable TV (via coax cable)
and set TV to be viewed through cable TV
input.
FRONT TV IGNITION SWITCH
INTERLOCK
–If Equipped
If your coach is equipped with a front
overhead TV, it is plugged into a special
electrical outlet with a built-in ignition switch
interlock. The device allows the front overhead
TV to operate only when the ignition key is in the
Off or Accessory positions.

Front TV Ignition Switch Interlock

-Typical View
8-2
AUDIO-VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
"A/V System Basic Operation" guide in
Section 8 of your Operator's Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.

DVD HOME THEATER SYSTEM

The DVD Home Theater System operates
from 120-volt AC household current only, so you
must have either the shoreline connected, the
generator running, or the inverter turned on (if
equipped).
The TV is connected to the Home Theater
System, which plays through theater speakers in
the lounge area of the coach.
Set TV Video Input
Turn ON the TV,
DVD player,
and Video
Selection box.
(Switch the Video Selection box to DVD for
the TV that you are going to use).
Press the SOURCE/INPUT button on the TV
remote or front of TV and select the DVD
input channel on the TV.
AV1 (Standard Definition), or
Component 2 (High Definition)
The TV screen will display the DVD player
logo when the correct input is selected.
Play DVD with Theater Sound
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING".

Advertisement

Table of Contents
loading

Table of Contents