Winnebago Ellipse User Manual page 48

SECTION 3 –
DRIVING YOUR MOTOR HOME
Step Cover Screw Locations
-Typical Installation
If your bed board is equipped with a front
panel, there are two screws that need to be
removed in order to take off the step cover (after
panel is removed). See following photo.
Remove two screws attaching
bed board frame to step cover
-Typical Installation
If your bed is not equipped with storage
underneath and the bed board needs to be
propped in order to access the engine, in some
models you may need to remove the steel frame
located underneath the bed in order to remove the
carpeted step cover.
3-24
Sliding
Step
Cover
Steel Frame
-Typical View
Steel Frame Screw Locations
-Typical Installation
Step Cover