Dish Network Satellite Receiver - Winnebago Ellipse User Manual

SECTION 8 –
ENTERTAINMENT
(located on the Automatic/In-Motion Satellite
Dish Control) to place the satellite dish into
In-Motion mode.
NOTE: Do not turn off the Automatic Satellite
Dish Control if using the satellite
switching feature. Refer to the King-
Dome user guide in your InfoCase for
more information.
Automatic/In-Motion Satellite Dish Control
(Located in overhead cabinet or
entertainment center cabinet,
depending on model)
4. You are now ready to watch Dish Network
satellite through your TV.
Further Information
See the Automatic Satellite System owner's
manual in your InfoCase for complete
description of features and instructions.
DISH NETWORK
RECEIVER
–If Equipped
To Watch Dish Network
1. Power ON TV and Video Selection Box.
2. Determine which TV you want to use (e.g.
TV1 for Main TV) and select "SAT" from the
Video Selection Box.
8-10
SATELLITE
®
Video Selection Box
(Located in entertainment
center cabinet)
3. Power ON Dish Network Receiver.
NOTE: There must be a clear "line of sight" to
the satellite. Mountains, buildings, trees,
telephone poles and other obstructions
can all block the satellite signal from
reaching the dish.
Dish Network Receiver
(Located in entertainment
center cabinet)
4. Power ON the Automatic/In-Motion Satellite
Dish Control. See "TV Digital Satellite
System (Automatic/In-Motion) information
elsewhere in this section for operating
instructions.
Automatic/In-Motion Satellite Dish Control
(Located in overhead cabinet or
entertainment center cabinet,
depending on model)